Fabric for the pocket. Use the same color of fabric as your sewing project if you want the pocket to blend in. If you want it to stand out, then you can use contrasting colors. [2] X Research source Fusing Ruler Chalk or marker Scissors Sewing machine The item you want to have a welt pocket.
For example, if you want your pockets to be 4 inches (10 cm) wide and 9 inches (23 cm) deep, then you should probably cut rectangles that are 6 inches (15 cm) by 11 inches (28 cm). This will ensure that there is plenty of material to make the pockets.
For example, if you are planning a pocket that is 4 inches (10 cm) wide, then cut two strips that are 5 inches (12. 7 cm) by 2 inches (5 cm).
For example, if you want to have a 4 inch (10 cm) pocket opening, then draw two parallel 4 inch (10 cm) lines on the fusing. Space the lines so they are about ½ inch (1. 3 cm) apart.
Remember to line up the fusing strips! They need to be as even as possible.
If you just want to make a welt pocket for practice first, then follow the process without pinning your rectangles to a sewing project. You could always sew the pocket into a project later on if you prefer.
Only sew across the lines for now. Do not go beyond the lines or sew in the areas between the lines.
The diagonal lines at the ends will make it easier to fold the material under and create the pocket opening.
Use an iron to press the fabric down and create a crease in the fabric.
If you prefer, you can also do a single welt pocket. This is when you only make a top or bottom flap. In this case, you would need to fold the top or bottom of the fabric enough so that it covers the entire opening. [17] X Research source [18] X Research source
Sewing around the entire welt will make the pocket more secure, but some people prefer the look of less stitching around the pocket and opt to just tack down the short sides of the welt.
Your welt pocket is now ready to go!
